What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 22.06.2025 02:39

Now when you have a certain ac resistance, then a current flows in a loop.
but I think this circuit , shows a few more pieces.
For this case there are devices called Metal oxide varistors (MOV).
6 Foods You Should Eat More of After 60, According to Dietitians - EatingWell
There are two important concepts here.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
How humpback whales are playfully communicating with humans, according to scientists - ABC News
A circuit breaker is similar, but is resettable.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
The third is lightning and “how it gets conducted into a home.”
Portugal beat Spain on penalties to win Nations League - Yahoo Sports
This is where this question deviates from being a 'generic' question, and becomes more specific.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
nine
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
What is lightning?
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
GameStop Earnings Reveal Return to Profits. Why the Stock Is Dropping. - Barron's
There are three different concepts here that are getting confused.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
This is where the MOV conducts again, and dissipated the energy.
Death threats to Astros pitcher Lance McCullers Jr. came from "overseas" resident - NBC Sports
He then describes Rainy Season and Lightning.
One is “what exactly is in a ‘surge protector’ ? ”
At least they know the answer if they wanted it.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
This device then solves the entire problem.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
What does success really mean to you? Is it about happiness, money, or something else?
a photo is worth a thousand words.
2024–10–16 [ OO OLAOYE OYEBODE ]
A fuse is a non-resetable over current circuit protector.
Google Photos albums redesign adds Material 3 Expressive toolbar, QR code sharing - 9to5Google
Barnstars:
The MOV will conduct when the voltage exceeds 50% of line voltage.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
Pacific sediment cores unlock millions of years of climate history - Earth.com
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
This one hit behind the barn.
The other is “what does a “fuse” do?”
How does a 45-year-old man get a girlfriend?
eight
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
ChatGPT wasn’t built for this, but it’s now the center of my daily routine - Android Authority
This is 'the assistant's answer'
He then asserts :
Upvotes:
What does a fuse do?
Here is a simplified AC power diagram.
[image of Common-mode choke]
but this device (an Inductor) … impedes the rapid changes in the current.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Edit 2024–10.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
But… the neutral is now “floating” because of the 1 ohm resistance.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
(Dc diagram shown, AC is similar).
At one ohm, the resistor has a maximum of 1 watt power.
It seems Mohan does not understand the difference between a comment and an Answer.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
An AC voltage/ current source, and an ac inductive load.
But it can get overloaded, and no longer works.
In schematic diagrams this is the symbol for a fuse:
These are simplified answers to the original question, and does not change anything I wrote above.
I post the exact comment here.
2024–10–10[John johnson John Johnson ]
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
[old diagram got deleted by accident]
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
One
This is the picture of an electronic coil of wire wound around a core of magnetic material.
He then describes the function of a fuse.
Because the load is inductive, the current lags the voltage.(by a bit).
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
the problem then depends on "how fast does the fuse operate?".
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
The bolt then partially travels down the line to your home.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
so, what happens?
So, the voltage could go up to 500 volts, and the fuse will not open up.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
2024–10–14 [Omar Gharbi Omar Gharbi ]
what exactly is a ‘surge’ protector?
It also is a device that limits the change in current flow.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
These devices are installed between the “hot” and “neutral” and protective ground.
First Sentence: